Rhin-o-tuff OD4012 Manuel d'utilisateur télécharger pdf (Page 13)

Paper Jam:

u The OD4012 and OD4000 punches use a circuit board for controlling

the punch cycle, this circuit board also has the ability to automatically

reverse the pusher bar and punch pins to their starting position if the

machine takes too much time to complete a punch cycle. This

condition could happen if too much material has been attempted to be

punched at one time. If this condition occurs, allow the machine to

attempt to reset itself back to its home position.

u If the punch does not reset itself back to its home position, the punch

will need to be reversed manually.

WARNING

Crush hazard.

Keep hands away

from moving parts.

Lockout and disconnect

power before servicing.

u Turn the machine power switch off and

remove some or all of the material in the

punch.

It is easier to remove one or two sheets at a time from the

backside of the material in the punch.

u OD4012 Manual Reverse utilizes a reversing

tool supplied with the punch.

Locate the

silver plug on the rear of the left side panel of

the machine. Remove the silver plug by prying it out gently with a

small flat tool. Insert the end of the reversing tool into the open hole

and engage the tool with the end of the motor shaft. Rotate the tool

counterclockwise 5-10 revolutions, until the punch pins have been

retracted back to the starting position. Remove most or all of the

material from the punch. Remove the reversing tool from the punch

and replace the small silver plug. Plug the power cord back into the

wall outlet and turn the power switch on. Test cycle the machine by

punching with no material in the punch, the machine will reset itself

back to its home position. Reduce the amount of material being

punched and continue working.

Turn the

machine power switch off and unplug

the power cord from the wall.

WARNING

Crush hazard.

Keep hands away

from moving parts.

Lockout and disconnect

power before servicing.

1 2 ... 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Rhin-o-tuff OD4012 Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Rhin-o-tuff OD4012